öffentliche Büro Dateien
IT-Beratung & Service S.G.

Eine ältere Version des Dokuments wurde geladen! Beim Speichern wird eine neue Version des Dokuments mit diesem Inhalt erstellt.

====== Ethernet Evolution ======

{{:playground:indisoft:net1973-1983.png?nolink&200 |}}
{{:playground:indisoft:net1985-1993.png?nolink&200 |}}
{{ :playground:indisoft:net1995-1999.png?nolink&200 |}}
{{ :playground:indisoft:net2009-2024.png?nolink&200|}}

Networking Essentials
v2.0

Skip to content
Communication Principles
Ethernet
Ethernet

5.4.1
The Rise of Ethernet
In the early days of networking, each vendor used its own proprietary methods of interconnecting network devices and networking protocols. If you bought equipment from different vendors, there was no guarantee that the equipment would work together. Equipment from one vendor might not communicate with equipment from another.

As networks became more widespread, standards were developed that defined rules by which network equipment from different vendors operated. Standards are beneficial to networking in many ways:

Facilitate design
Simplify product development
Promote competition
Provide consistent interconnections
Facilitate training
Provide more vendor choices for customers
There is no official local area networking standard protocol, but over time, one technology, Ethernet, has become more common than the others. Ethernet protocols define how data is formatted and how it is transmitted over the wired network. The Ethernet standards specify protocols that operate at Layer 1 and Layer 2 of the OSI model. Ethernet has become a de facto standard, which means that it is the technology used by almost all wired local area networks, as shown in the figure.

The figure shows a rectangle that identifies the proprietary vendor protocols from the 1970s as I B M, N C R, Xerox, D E C, and H P. An arrow points to another rectangle to the right that identifies the limited number of standards from the 1980s and 1990s as I E E E 802 dot 3 Ethernet, I E E E 802 dot 4 Arcnet, and I E E E 802 dot 5 Token Ring. An arrow points to another rectangle to the right that identifies the current winning standard as 802 dot 3 Ethernet.

Proprietary Vendor Protocols
(1970s)Limited Number of Standards
(1980s and 1990s)IBMAnd the Winner is:NCRXeroxDECHPIEEE 802.3 (Ethernet)IEEE 802.4 (ARCnet)IEEE 802.5 (Token Ring)IEEE 802.3 (Ethernet)

5.4.2
Ethernet Evolution
The Institute of Electrical and Electronic Engineers, or IEEE (pronounced eye-triple-e), maintains the networking standards, including Ethernet and wireless standards. IEEE committees are responsible for approving and maintaining the standards for connections, media requirements and communications protocols. Each technology standard is assigned a number that refers to the committee that is responsible for approving and maintaining the standard. The committee responsible for the Ethernet standards is 802.3.

Since the creation of Ethernet in 1973, standards have evolved for specifying faster and more flexible versions of the technology. This ability for Ethernet to improve over time is one of the main reasons that it has become so popular. Each version of Ethernet has an associated standard. For example, 802.3 100BASE-T represents the 100 Megabit Ethernet using twisted-pair cable standards. The standard notation translates as:

100 is the speed in Mbps
BASE stands for baseband transmission
T stands for the type of cable, in this case, twisted-pair.
Early versions of Ethernet were relatively slow at 10 Mbps. The latest versions of Ethernet operate at 10 Gigabits per second and more. Imagine how much faster these new versions are than the original Ethernet networks.

Drag the slider bar in the figure across the timeline to see how Ethernet standards have developed over time.

The animation shows a timeline of 1973, 198, 1983, 1985, 1990, 1993, 1995, 1998, 1999, 2002, 2006, 2009 2015, 2016, present. A table appears below the timeline with 3 rows: year, standard, and description. 1973, Ethernet, Ethernet invented by Dr. Robert Metcalf of Xerox Corp., 1980, D I X standard Ethernet II, Digital Equipment Corp., Intel, and Xerox (D I X) release a standard for 10 Mb/s Ethernet over coaxial cable, 1983 I E E E 802 dot 3 10 base 5, 10 Mb/s Ethernet over thick coaxial cable, 1985, I E E E 802 dot 3a 10 base 2, 10 Mb/s Ethernet over thin coxial cable, 1990 I E E E 802 dot 3i 10 Base t, 10 Mb/s Ethernet over twisted pair (T P), 1993, I E E E 802 dot 3j 10 base f, 10 Mb/s Ethernet over fiber optic, 1995, I E E E 802 dot 3u, 100Base – xx, Fast Ethernet: 100 Mb/s Ethernet over twisted pair (T P) and fiber (various standards), 1998, I E E E 802 dot 3z 1000 base – x, Gigabit Ethernet over fiber optic, 1999 I E E E 802 dot 3ab 100 base – T, Gigabit Ethernet over twisted pair, 2002, I E E E 802 dot 3ae, 10G base – xx, 10 Gb/s over fiber optic, 2006, I E E E 802 dot 3an 10G base T, power over Ethernet enhancements, 2009, 802 dot 3at (PoE), power over Ethernet enhancements, 2015, 100GbE and 40GbE, 100G / 40G for optical fiber, 2016 to present, 2.5GBase – T and 5GBase – T, 2.15 Gigabit and 5 Gigabit Ethernet over twisted pair.

Ethernet Evolution TimelinePresentYearStandardDescription19731980198319851990199319951998199920022006200920152016 to presentEthernetDIX standard
Ethernet IIIEEE 802.3
10 BASE-5IEEE 802.3a
10 BASE-2IEEE 802.3i
10 BASE-TIEEE 802.3j
10 BASE-FIEEE 802.3u
100 BASE-xxIEEE 802.3z
1000 BASE-XIEEE 802.3ab
1000 BASE-TIEEE 802.3ae
10G BASE-xxIEEE 802.3an
10G BASE-T802.3at (PoE)100GbE and 40GbE2.5GBASE-T and 5GBASE-TEthernet invented by Dr. Robert Metcalf of Xerox Corporation.Digital Equipment Corporation, Intel, and Xerox (DIX) release a standard for 10 Mbps Ethernet over coaxial cable.10 Mbps Ethernet over thick coaxial cable10 Mbps Ethernet over thin coaxial cable10 Mbps Ethernet over twisted pair (TP)10 Mbps Ethernet over fiber opticFast Ethernet: 100 Mbps Ethernet over twisted pair (TP) and fiber (various standards)Gigabit Ethernet over fiber opticGigabit Ethernet over twisted pair10 Gbps over fiber opticPower over Ethernet enhancementsPower over Ethernet enhancements100G/40G for optical fiber2.5 Gigabit and 5 Gigabit Ethernet over twisted pair((mask))

5.4.3
Video - Ethernet Addressing
Play Video

5.4.4
The Ethernet MAC Address
All communication requires a way to identify the source and destination. The source and destination in human communication are represented by names.

When your name is called, you listen to the message and respond. Other people in the room may hear the message, but they ignore it because it is not addressed to them.

On Ethernet networks, a similar method exists for identifying source and destination hosts. Each host connected to an Ethernet network is assigned a physical address which serves to identify the host on the network.

Every Ethernet network interface has a physical address assigned to it when it is manufactured. This address is known as the Media Access Control (MAC) address. The MAC address identifies each source and destination host on the network.

The animation has a topology consisting of a switch with links to four host PCs labeled, H1, H2, H3 and H4. H1 says I need to send information to H3. A frame appears on the screen of the PC and an expanded view of the frame appears above the PC. The frame consists of the framing addressing and data. The destination address CC:CC:CC:CC:CC:CC, the source address AA:AA:AA:AA:AA:AA and the data part of the frame is encapsulated. The frame from H1 is forwarded to the switch. The switch then forwards the frame out every interface but the interface connected to H1. When H2 and H4 receive the frame and they say This is not addressed to me. I shall ignore it. When H3 receives the frame it says This is mine.

This is not addressed to me. I shall ignore it.This is not addressed to me. I shall ignore it.This is mine.I need to send information to H3.Destination AddressSource AddressCC:CC:CC:CC:CC:CCAA:AA:AA:AA:AA:AAEncapsulated dataFrame Addressing

5.4.5
Lab - Determine the MAC Address of a Host
In this lab, you will complete the following objectives:

Determine the MAC address of a Windows computer on an Ethernet network using the ipconfig /all command.
Analyze a MAC address to determine the manufacturer.
 Determine the MAC Address of a Host
5.3
Network Communication Models
5.5
Communication Principles Summary

Zusammenfassung

Hinweis: Durch das Bearbeiten dieser Seite geben Sie Ihr Einverständnis, dass Ihr Inhalt unter der folgenden Lizenz veröffentlicht wird: CC Attribution-Share Alike 4.0 International

öffentliche Büro Dateien IT-Beratung & Service S.G.

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Seiten-Werkzeuge

öffentliche Büro Dateien
IT-Beratung & Service S.G.