Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- playground:about:flipper:start [2025/04/05 10:59]
47.128.60.76 alte Version wiederhergestellt (2024/07/05 02:58)
+++ playground:about:flipper:start [2025/04/11 02:17] (aktuell)
47.128.47.164 alte Version wiederhergestellt (2024/11/14 11:25)
@@ Zeile 1: / Zeile 1: @@
+====== Link Liste ======
+  - https://lab.flipper.net/
+  - https://docs.flipper.net/
+  - https://docs.flipper.net/mobile-app
+  - https://flipperzero.one/
+  - https://lab401.com
 [[li7an3a|Flipper0 Stefan]] {{Li7an3a-backupRelease0.64.4-20240505-150925.tgz}} Kaufzustand
@@ Zeile 6: / Zeile 14: @@
 [[l4n0e|L4n0e Flipper3]]
+{{youtube>Yw4fQcKor4g?medium}}
+https://uberguidoz.github.io/DownGit/#/home
+Nach verbinden von FlipperZero an ein Linuxrechner sollte folgende Zeile auftauchen ansonsten anderes USB-Kabel benutzen. \\
+$> lsusb
+Bus 001 Device 005: ID 0483:5740 STMicroelectronics Virtual COM Port
 ----
@@ Zeile 29: / Zeile 45: @@
 ===== Tech specs =====
-https://flipperzero.one/#Tech%20specs
+{{:playground:about:flipper:flipper_inside.png?linkonly |}}  https://flipperzero.one/#Tech%20specs  {{ :playground:about:flipper:whatsinside.png?linkonly|}}
 <note tip>
@@ Zeile 65: / Zeile 81: @@
   - <4€
-  - ESP32-Wroom 32
+  - ESP-WROOM-32 dev board v1
+  - Chip Xtensa® Dual-Core 32-bit LX6
   - Clock frequency range 80 MHz / 240MHz
-  - RAM 512kb
+  - 48 GPIO pins in total, only 25 are out to pin headers
-  - External flash memory 4MB
+  - 520kB internal SRAM (there’s also 448 KB of ROM, 520 KB of SRAM)
+  - 4MB external flash memory
   - Power supply voltage (USB) mini or type usbC 5V
   - Required operating current 	Min. 500mA
   - Input/output voltage 3.3V I/o pins 	34 Interfaces 	SPI, I2C, I2S, Can, Uart
-  - Wi-fi protocols 	802.11 b/g/n (802.11n up to 150 Mbps)
+  - Wi-fi transceiver HT40 protocols 802.11 b/g/n (802.11n up to 150 Mbps)
-  - Wi-Fi frequency 	2.4 GHz - 2.5 GHz
+  - Wi-Fi frequency 2.4 GHz - 2.5 GHz
-  - Bluetooth 	V4.2 - BLE and Classic Bluetooth
+  - Bluetooth V4.2 - BLE and Classic Bluetooth
+  - 2.2V to 3.6V board includes an LDO voltage regulator to keep the voltage stable at 3.3V
+  - can reliably provide up to 600 mA | 5 µA during Sleep Mode | 250mA during RF transmissions
   - 6-8€
+https://en.wikipedia.org/wiki/ESP32#Programming
 </note>
 https://flipperzero.one/#Tech%20specs (fast ende der Seite)
@@ Zeile 163: / Zeile 184: @@
 https://crates.io/crates/esp32s3
+https://www.youtube.com/watch?v=tx_ynPOQF4w&list=PL0U7YUX2VnBFbwTi96wUB1nZzPVN3HzgS&index=2

öffentliche Büro Dateien IT-Beratung & Service S.G.

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Unterschiede

Seiten-Werkzeuge

öffentliche Büro Dateien
IT-Beratung & Service S.G.